Forklift Attachments Long Beach - Many different jobs would be impossible without the help of forklift attachments. Forklift attachments make many jobs safer, easier and quicker to complete. In addition to general forklift training, operators must be properly training for each attachment they intent to use.
Forklift attachments come in a wide variety of hydraulic and non-hydraulic attachments. The benefits of utilizing a forklift attachment include decreasing:
1. Employee accidents;
2. Damage to stock;
3. Manpower;
4. Time; and
5. Fuel consumption.
Equipment Considerations
Forklift attachments can be switched out to replace existing attachments or may be used on machines that don’t currently have one. There are many equipment factors to consider prior to adding or replacing any forklift attachments. Considerations include the carriage type, the forklift model, the capacity of the forklift and the number of hydraulic functions used to power the features of the attachment.
Not considering these issues will drastically increase the safety risks associated with operating the machine and its attachments. This can increase risks relating to operator safety, forklift damage, stock damage and more. Extra safety factors must be considered which will be discussed in more detail.
Forklift Rating and Re-Rating
Manufacturers give forklifts a lift capacity rating that needs to be considered and adjusted when adding or changing forklift attachments. Manufacturers of forklift attachments usually offer calculators available online to estimate the safe lifting capacity when using a particular attachment. It is important to note that only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. Once the forklift manufacturer has re-rated the machine, it will ideally have a new specification plate that is factory authorized. This new specification plate will replace the original plate and should be installed showing the new rating for the forklift.
Equipment Upgrades
It is vital to note when working with forklift attachments the equipment’s hydraulic function consists of a forklift valve that has a lever located near the operator which creates two areas for pressurized hydraulic passages for oil. While not all forklift attachments are hydraulic, hydraulic attachments often include more features than the forklift has valves. When this happens, the forklift needs to have one or more valves added. There are numerous ways a valve can be added. There are many ways to add a forklift valve.Equipment manufacturers make forklift accessories for hose routing and valve placement. However, the parts and labor to install these can be so expensive as to make this option impractical. Alternative methods include adding a solenoid valve in conjunction with a hose or cable reel that diverts oil flow from an existing function. Unfortunately, hose and cable reels can sometimes block the operator's view and can be easily damaged. Kits are available that rely on a solenoid valve and certain hoses to transform the reinforced braid to additionally function as an electrical conduit. Since these hoses replace existing forklift hoses, they remain safe from external damage while maintaining clear vision for the operator.
Safety Considerations
Proper training must be obtained prior to fitting any forklift attachment. The operator needs to be able to remove, fit and operate the attachment.
Two important safety factors must be considered before the use of any forklift attachment.
The nominal load rating will be reduced on the forklift once any attachment is applied. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Secondly, the forklift’s center of gravity will be affected when any forklift attachment is added. The forklift’s stability will be reduced and this needs to be computed for safety. Due to the attachment weight being situated in front of the fulcrum point, the forklift needs to be driven as though it is partially loaded even when it is empty. Thus, when using any attachment, an operator should travel at a slow speed and make turns slowly and gently. Check the forklift’s capacity to ensure that every attachment is listed on the data plate.
Certain safety checks need to be done before using any kind of attachment. The forklift attachment must be permitted on the forklift’s data plate, locked properly, correctly attached, appropriate for the particular load and appropriate for the type of forklift being used.
List of Common Forklift Attachments
Below is a list of popular forklift attachments and their general uses. This is just a sample list of some of the most popular forklift attachments. Forklift attachments are designed to increase job efficiency for many applications.
SIDESHIFTER:
The operator can manipulate the forks laterally with a sideshifter. This allows for easier load placement without having to move the entire forklift.
FORK POSITIONERS:
The fork positioners adjust for different loads by moving the forks together or apart in relation to each other.
DIMENSIONING DEVICES:
Dimensioning devices offer cargo dimensions to create more warehouse efficiency and better truck and trailer space. This is commonly used with billing systems that record volume.
ROTATOR:
Assists in righting skids that have tilted, handling custom load requirements and quick unloading. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
The roll and barrel clamp simplifies grasping rounded loads such as barrels. It has numerous pressure settings for handling fragile items with less damage potential. This attachment often has a rotate function to change the load from a vertical to a horizontal position.
CARTON AND MULTIPURPOSE CLAMP:
Allows for grasping a load with a more squared shape, often with pressure settings. Products like cartons, boxes and bales can be moved with this type of attachment.
POLE ATTACHMENTS:
Pole attachments are long metal poles in place of the forks. They are useful for picking up linoleum and rolled up carpet or similar items.
SLIP SHEETER OR PUSH-PULL:
The slip sheeter or push-pull allows the operator to move sheets by clamping onto slip sheets. This is an option instead of relying on pallets. The slip sheet can be moved onto thin and wide metal forks to simplify loading or unloading by pushing the slip sheet. The “Save” variation allows the slip sheet to be taken off for reuse later. The “Standard,” attachment variation is another option.
DRUM HANDLER:
Allows for grasping drums, either with a spring-loaded jaw to grip the top lip of a drum, or with arms that encircle the drum, for transport.
DRUM AND STORAGE BIN TIPPER:
Allows for quick transfer of loose or liquid contents in large containers.
MAN BASKET:
Lift platform meant for lifting workers and complete with railings and brackets for safety harnesses.
TELESCOPIC FORKS:
The telescopic forks are used in locations with a two pallet stacking design were one shelf is placed right behind another with no aisle between them.
SCALES:
Enables operators to simultaneously weigh and transport pallets, eliminating the need to interrupt transport to travel to scales, and can be obtained in legal-for-trade weights for operations that bill by weight.
SINGLE-DOUBLE FORKS:
Allow movement of a single pallet or platform or two pallets side by side. With the correct attachment/s a single forklift can be used for multiple specialist materials handling tasks alongside normal lifting tasks, thus reducing the need for owning a specialist unit alongside a normal unit and the larger running and maintenance costs associated with multiple units.
SNOW PLOW:
Designed for snow removal and distribution but can also be used to move other types of loose material.
SKIPS:
Skips enable quick and safe waste removal to a skip or waste compactor. They may feature a bottom-emptying design or be a roll-forward model.
BOOMS AND JIBS:
Booms and jibs allow forklifts extended reach. They are available to transport deep or highly stacked loads, suspended loads and more. These attachments can be low profile, precision lifting or reach over models to facilitate extended lengths.
Forklift Attachment PDF
